English Views: 324 Author: Site Editor Publish Time: 2021-09-27 Origin: Site
The work of the excavator bucket is very hard. Therefore, we will find that over time, our machines will replace many parts during the life cycle. Therefore, we must realize that it is very important to learn to maintain the excavator bucket. As with indoor maintenance tools, we need to maintain the machine and its accessories in the environment where the excavator is used. We must treat the excavator bucket correctly and make full use of it. The most important thing is to know how to maintain it. In order to improve productivity and achieve cost-saving effects.
There are many kinds of excavator buckets, such as rhinox bucket, mini excavator grading bucket, rotating excavator bucket, etc. Different kinds of excavator backets may need different methods to maintain. Although the maintenance details may be different, the general usage methods are the same. The following is a brief introduction to maintenance methods.
Check your bucket every time you use it. This is essential to ensure that you are doing a good job. Not only that, a damaged bucket is a risk to the health and safety of each of workers. When inspecting barrels, there are generally several aspects to check. Check for cracks. Check whether the grounding tool or wear plate is loose, broken or missing. Focus on areas of excessive wear. If it is a shovel, make sure that the door and jaws are properly aligned and the cylinder is not leaking. Check that the bush has not come out of the hole. Make sure that the pin and grease line cap are in place.
If the quality of your machine and bucket is important to you, be aware that the most common cause of excessive bucket wear is to make the machine walk. Walking will put unnecessary pressure on the bucket. If you walk, you will add a lot of weight to the bucket.
This is very important because there are many kinds of buckets in the market now, such as biggest excavator bucket, mini excavator screening bucket, excavator trenching bucket and so on.
A common mistake is to use a larger excavator bucket, because many people think it can get the job done faster. It may be able to complete the work, but it is more costly and less efficient. The best option is to use a bucket of the right size, not too small or too big.
To ensure easier penetration of the ground and more effective digging, sharp bucket teeth are essential. Compared with other parts of excavators, bucket teeth, such as heavy bucket tooth, GET parts bucket tooth, ripper bucket tooth, etc. are relatively cheap. During the excavation process, the cog and spur teeth consume more fuel and spend more time for the operator.
Cheap buckets are bad, because they are inefficient designs and low-quality metal. Good quality buckets will have better performance and fuel efficiency. A better bucket will also be more durable because its design makes the bucket bear less pressure.
In short, it is not difficult to maintain your bucket, just pay attention to it frequently and use it correctly. A good machine will increase productivity and efficiency.
